Back

Aqua Cutter 410A

It’s small, compact and suitable for all kinds of operations. Most importantly, it gets the job done every time. With an electric motor and the help of an articulated arm you can reach horizontal, vertical and overhead areas easier than ever before. Meet the world’s smallest standard manufactured hydrodemolition robot – Aqua Cutter 410A.

Small and destined for greatness

The Aqua Cutter 410A is specially designed for applications in confined areas and to replace hand lance work. It’s small size and low weight allow the robot to easily pass through narrow passages such as door frames or operate from scaffoldings. The hydraulic and articulated arm, with two rotating joints and three extensions, can reach as far as 3 m (9,8 ft). This makes the robot agile, powerful and very easy to position.

Features

  • Evolution 2.0 control system

    The Aqua Cutter Evolution control system features highly computerized robotic management for all advanced operations.

    The evolution control system enables you to program geometrical figures and operate at different depths in the same overpass. The display is interactive and graphic, making it very easy to program the robot.

    Learn more about Evolution control system
  • Equal Distance System

    All of our Aqua Cutter robots feature our patented EDS system, short for Equal Distance System. The EDS keeps a preset distance from the nozzle to the concrete surface, regardless of the attack angle of the water jet. This is a major advantage. Standard systems without EDS make the water jet lose a lot of power before it hits the concrete.

    Learn more about Equal Distance System
  • Disconnectable PCM

    The Power Control Module (PCM) can be disconnected from the tracked crawler. This allows you to drive the crawler into tight and inhospitable environments, such as small tunnels and flooded sewer pipes. You can operate the crawler from a safe distance with a radio remote control. In such situations the PCM is connected to the crawler by a cord, ensuring complete control of the robot in horizontal, vertical and overhead operations.

  • Pop the hood

    The innovative design provides unrivaled ease of access for all maintenance jobs. This means less downtime for maintenance and more time for actual work.

    The foldable back cover of our Aqua Cutter 410 robots offers total access for both daily maintenance, such as checking oil levels, and regular service jobs, such as oil and filter changes.

  • Intelligent Sensing Control

    Intelligent Sensing Control, ISC, uses intelligent software that operates via closed loop systems that continuously memorize the movements of the water jet. It also monitors the process from the operator’s settings. The system is standard on all Aqua Cutter robots as well as the Ergo, used for controlling the Aqua Spine.

    Learn more about Intelligent Sensing Control
Specifications410A evolution
Total weight1190 kg (2620 lb)
Length2,1 m (6,9 ft)
Min. width0,78 m (2,6 ft)
Track width0,78-1,16 m (2,6-3,8 ft)
Min. height0,99/1,07 m (3,2/3,5 ft)
Operating height3 m (9,8 ft)
Side reach1,3 m (4,3 ft)
Lance angle±45°
Working width0-1,7 m (0-5,6 ft)
Working width extended0-3,2 m (0-10,5 ft)
Drive source Electric motor 3 phase 5,5kW 400 VAC 16A (other on request)

Drawings and measurement

Aqua Cutter 410A Aqua Cutter 410A Aqua Cutter 410A Aqua Cutter 410A Aqua Cutter 410A Aqua Cutter 410A Aqua Cutter 410A
Back