Menu

Small and destined for greatness

It’s small, compact and suitable for all kinds of operations. Most importantly, it gets the job done every time. With the help of an articulated arm you can reach horizontal, vertical and overhead areas easier than ever before. Meet the world’s smallest standard manufactured Hydrodemolition robot – the AQUA CUTTER 410A.

Robotic arm wrestling

The AQUA CUTTER 410A is specially designed for applications in confined areas and to replace hand lance work. Its small size and low weight allow the robot to easily pass through narrow passages such as doorframes or operate from scaffoldings. The hydraulic and articulated arm, with two rotating joints and three extensions, can reach as far as 3 m (9,8 ft). This makes the robot agile, powerful and very easy to position.

Control in sticky situations

The power control module (PCM) can be disconnected from the tracked crawler. This allows you to drive the crawler into tight and inhospitable environments, such as small tunnels and flooded sewer pipes. You can operate the crawler from a safe distance with a radio remote control. In such situations the PCM is connected to the crawler by a cord, ensuring complete control of the robot in horizontal, vertical and overhead operations.

  • Aqua cutter 410A
  • Aqua cutter 410A
  • Aqua cutter 410A
  • Aqua cutter 410A
  • PCM carrier
410A evolution
Total weight: 1190 kg (2620 lb)
Length: 2,1 m (6,9 ft)
Min. width: 0,78 m (2,6 ft)
Track width: 0,78-1,16 m (2,6-3,8 ft)
Min. height: 0,99/1,07 m (3,2/3,5 ft)
Operating height: 3 m (9,8 ft)
Side reach: 1,3 m (4,3 ft)
Lance angle: ±45°
Working width: 0-1,7 m (0-5,6 ft)
Working width extended: 0-3,2 m (0-10,5 ft)
Drive source: Electric motor 3 phase 5,5kW
400 VAC 16A (other on request)
  • Aqua cutter 410A specification
  • Aqua cutter 410A cableway
  • Aqua cutter 410A concrete foundation
  • Aqua cutter 410A wall
  • Aqua cutter 410A harbor
  • Aqua cutter 410A transportation

Innovations and design

Disconnectable PCM

Disconnectable PCMThe power control module (PCM) can be disconnected from the tracked crawler. This allows you to drive the crawler into tight and inhospitable environments, such as small tunnels and flooded sewer pipes.

Disconnectable PCM >>

 

Aqua cutter 410 disconnectable PCM

Evolution control system

Evolution controlIf you choose the AQUA CUTTER Evolution control system you’ll enable highly computerized robotic management for advanced operations. In addition, you’ll get the 45° EDS roller that keeps a set distance between the nozzle and the concrete, without any water jet energy waste. The Evolution control system allows you to program geometrical figures such as circles, triangles, squares and rhomboids. Today, it’s the most sophisticated and flexible system on the market for Hydrodemolition robots.

Evolution control system >>

 

Classic control system

ControlIf you choose the AQUA CUTTER Classic control system you’ll get our patented ISC system – Intelligent Sensing Control, with no cables or electronic sensors outside the enclosed engine hood. You’ll also get the 30° EDS roller that keeps a set distance between the nozzle and the concrete. The classic control system makes it very easy to program the robot and all speeds are set manually with hydraulic valves. You can easily program and determine your operation width and area thanks to mechanical stoppers on the front roller beam.

Classic control system »

Classic control system

EDS – Equal Distance System

EDSAll our cutter robots features our patented EDS system, short for Equal Distance System. The EDS system keeps a preset distance from the nozzle to the concrete surface, regardless of the attack angle of the waterjet. This is a major advantage. Standard systems without EDS make the waterjet lose a lot of power before it hits the concrete.

EDS –Equal Distance System >>

Easy adjustable stroke of oscillation

OscillationThe stroke can be changed in a minute to adapt for the scope of the work. A shallow cut requires a longer stroke and a deep cut needs a short stroke. This allows you to get a higher removal rate and better cut results in all situations.

Easy adjustable stroke of oscillation >>

Easy adjustable stroke of oscillation

Reliable and easy service

Easy serviceInnovative design provides unrivalled ease of access for all maintenance jobs. This means less downtime with maintenance work and more time for actual work.

Reliable and easy service >>

Removal in corners

CornersHow do you reach corner areas where the wall and floor meet? Usually you need some kind of handheld trimming equipment. We have solved this problem in an ingenious way. With our robots you’ll finish the job with only one overpass thanks to unique lance control and the EDS system. No hand lances. No adjustments.Perfect results.

Removal in corners >>

Corner cutting

Radio remote control

Radio controlA radio remote control allows you to operate the AQUA CUTTER robot from a safe distance, wireless or with a hard wire. That’s up to you and the operation at hand.

Radio remote control >>

Radio remote control

Nozzles

NozzlesAt Aquajet we use unique ceramic nozzles, specially designed for highly demanding operations and all kinds of Hydrodemolition applications. The lifespan of a nozzle is up to 300-350 hours depending on the water quality. In terms of efficiency, our nozzles are unbeatable.

Nozzles >>

Nozzles