Menu
  • ERGO controller aquajet systems products

The power of ERGO

New intelligent sensing control that is unsensitive for long hose lengths and completely free from settings. No sensivity settings and sensing times to adjust. No cables, no sensors, but still possible to use if you want to. No lance turn time to sync, no manual speed adjusting knobs, everything syncs automatically. But still possible to adjust lance angle, oscillation, multiple traverses etc. IF YOU WANT TO.

The new ERGO Controller has low weight and can easily be transported, even laying down if needed. The design is ergonomic and just makes the work easier.

Quick “GO!”
Multi connector for hydraulic hoses, specially developed by us for this environment. It’s spill free, 100% sealed from moisture and with simple protection cover when not connected.
Service friendly filter replacements, particle filter and water absorbing filter. Water safe breather. The large and wide wheels gives low ground pressure and makes it easy to roll over soft and uneven surfaces.

The wheels are puncture free and oil resistant. With built in fix points for transporting, it’s easy to relocate. It can be transported both laying down or upright.

Technical features
Air cooling system with directed air stream inside the controller. With just 4.2 kW it can run on small fuses.
It has a oil cooled motor, 200bar high effective load sensing hydraulics and a hydraulic cyclone to separate oil from air.

 

 

  • ERGO controller aquajet systems products news
  • ERGO controller aquajet systems products news
  • ERGO controller aquajet systems products news
  • ERGO controller aquajet systems products news
  • ERGO controller aquajet systems products news
  • ERGO controller aquajet systems products news
  • ERGO controller aquajet systems products news
Length:  530 mm
Width:  430 mm (620 mm over wheels)
Height:  1110 mm
Wheels:  320 x 100 mm, puncture free and oil resistant
Dry weight:  98 kg
Weight with oil:  123 kg
Max hydraulic pressure:  200 bar
Max flow:  21,4 l/min @ 50 Hz
Oil volume:  25 l
Motor power:  4,2 kW
Voltage: 3×400 VAC @ 50 Hz / 3×480 VAC @ 60 Hz / 3×230 VAC @ 50 Hz